PIK-20 and PIK-20B list of drawings
Drawings with an active link may be downloaded from this page as pdf files. Observe that the drawing opening from the link is not necessarily the same amendment as that marked in the list. This due to the fact that the amendment that has been noted in the list may not be found in Trafi’s archives. In this case the drawing has been replaced by its closest equivalent. Drawings that are not listed may be ordered from Traficom.
| Number | Size | Type | Subject | Amendments | Further information | ||
|---|---|---|---|---|---|---|---|
| a | b | c | |||||
|
General drawings | |||||||
| 001 | 1 | General drawing | 25 | ||||
| 002 | 2 |
Drainage and pressure balancing holes | 25 | ||||
| Fuselage | |||||||
| 102 | 0 | Construction of the fuselage | 25 | 70 | |||
| 103 | 3 | Forward main bulkhead | 25 | ||||
| 104 | 3 | Aft main bulkhead | 60 | ||||
| 105 | 0 | Cockpit equipment installation | 64 | ||||
| Rudder control | |||||||
| 201 | Rudder and fin | 25 | |||||
| 202 | 0 | 22 | 72 | ||||
| Elevator control | |||||||
| 302 | Construction of the elevator | 25 | |||||
| Wing | |||||||
| 402 | 0 | Attachment of the wing | 25 | ||||
| 403 | 0 | Wing mechanisms | 84 | ||||
| 404 | 1 | Root rib dimensions | |||||
| 405 | 0 | Wing construction | 25 | 73 | 84 | ||
| 406 | 1 | Flange and web construction | |||||
| 407 | 1 | Wing flap and aileron construction | |||||
| Metal components | |||||||
| 501 | 1 | General drawing of the control stick | 25 | ||||
| 501-01 | 3 | Control stick | 25 | 70 | 100 | ||
| 501-02 | 3 | Control stick torsion tube | 4 | ||||
| 501-03 | 3 | Control stick adjustment spring | 25 | ||||
| 501-04 | 4 | Adjustment spring bearing | 25 | ||||
| 501-09 | 4 | Brake handle cable connection | |||||
| 501-18 | 4 | Adjustment spring knob | |||||
| 505 | 1 | Rudder controls | 25 | ||||
| 505-02 | 3 | Rudder control pedal | 25 | 69 | |||
| 505-02-1 | 4 | Bearing bush | 25 | 69 | |||
| 505-03 | 4 | Upper sliding tube | |||||
| 505-04 | 4 | Lower sliding tube | |||||
| 505-05-1 | 4 | Rudder controls end plate, forward | 25 | ||||
| 505-05-2 | 4 | Rudder controls end plate, aft | 25 | ||||
| 505-06 | 3 | Fuselage | 16 | ||||
| 505-07 | 4 | Rudder control adjustment latch | |||||
| 505-08 | 4 | Adjustment latch spring | |||||
| 505-09 | 4 | Pedal spring | |||||
| 505-10 | 4 | Pedal mounting bush | 80 | ||||
| 505-16 | 4 | Cable forward attaching bracket | |||||
| 505-17 | 4 | Shaft bush | |||||
| 505-18 | 4 | Adjustment puller spring | |||||
| 506 | 2 | B | Flap control | 3 | 25 | 80 | |
| 506-01 | 4 | B | Body | 3 | 25 | 80 | |
| 506-02 | 4 | B | Gear rack | 3 | 25 | 80 | |
| 506-03 | 3 | Crank | |||||
| 506-04 | 4 | Retainer | 25 | 80 | |||
| 506-05 | 4 | Bush | 80 | ||||
| 506-06 | 4 | Spring | 80 | ||||
| 506-07 | 4 | Handle | 80 | ||||
| 506-08 | 4 | Knob | 80 | ||||
| 506-10 | 4 | Shaft | |||||
| 506-12 | 4 | Bush | |||||
| 506-13 | 4 | Gear wheel | |||||
| 506-14 | 4 | Bush | |||||
| 506-15 | 4 | Wedge | |||||
| 506-16 | 4 | Bush | |||||
| 506-17 | 4 | Bush | |||||
| 506-19 | 3 | B | Fuselage plate | 3 | 25 | ||
| 506-20 | 4 | Bush | |||||
| 506-21 | 4 | Bush | |||||
| 506-27 | 4 | Bush | |||||
| 506-29 | 4 | Bush | |||||
| 506-30 | 4 | Bush | |||||
| 506-50 | 4 | B | Slide | ||||
| 506-55 | 4 | B | Spring | ||||
| 507 | 1 | Flap actuator in the center fuselage | 25 | ||||
| 508 | 1 | Landing gear | 3 | ||||
| 508-01 | 2 | Forward strut | |||||
| 508-02 | 3 | Lower aft strut | 69 | ||||
| 508-03 | 1 | Upper aft strut | 3 | 69 | |||
| 508-05 | 4 | Bearing bush | |||||
| 509 | 3 | Landing gear components | 80 | ||||
| 510 | 2 | Elevator and rudder control components | 19 | 69 | 80 | ||
| 510-05 | 4 | Stabilizer bush | 25 | ||||
| 511 | 3 | Flight control metal parts | 4 | 80 | |||
| 512-01 | 4 | Pushrod heads | 22 | 87 | |||
| 512-02 | 4 | Pushrod head | 87 | ||||
| 512-03 | 4 | Bellcrank centerpiece | 80 | ||||
| 512-05 | 4 | Pushrod guide roller shaft | |||||
| 512-06 | 4 | Pushrod guide roller | 80 | ||||
| 512-08 | 4 | Pushrods | 25 | ||||
| 512-09-1 | Pushrod heads | 80-100 | |||||
| 512-09-2 | 4 | Breakaway joint | |||||
| 512-10 | 4 | Extension of the elevator express latch | |||||
| 512-11-1 | 4 | Pushrod head | 22 | 69 | 87 | ||
| 512-11-2 | 4 | Pushrod head | 22 | ?? | ?? | ||
| 513-01 | 3 | Wing mount components | 25 | 73 | 84 | ||
| 513-02 | 3 | Wing master attachment bolt | |||||
| 514 | 3 | Wing mount components | |||||
| 515 | 3 | Bellcranks | |||||
| 516 | 3 | Elevator bellcrank | 19 | ||||
| 517 | 1 | Flap operation | |||||
| 517-01 | 1 | Flap hinge | 4 | ||||
| 517-02 | 4 | Control lever | 4 | 25 | 80 | ||
| 517-03 | 4 | Hinge | 4 | 69 | 80 | ||
| 517-04 | 4 | Shaft | 19 | 80 | |||
| 517-12-1 | 4 | Aileron control bracket | |||||
| 517-12-2 | 4 | Bracket counterplate | |||||
| 517-12-3 | 4 | Bracket shaft | |||||
| 517-16 | 4 | Aileron hinge shaft | 25 | ||||
| 517-17 | 4 | Aileron bearing | |||||
| 517-21 | 4 | Aileron hinge bracket | 25 | 69 | |||
| 518 | 2 | Aileron lever fixing mount | 4 | 25 | 80 | ||
| 520 | 3 | Landing gear operation | 53 | ||||
| 520-01 | 3 | Body | 80 | ||||
| 520-02 | 3 | Lifter | 80 | ||||
| 520-03 | 4 | Attachment bracket | 80 | ||||
| 520-04 | 4 | Latch | 53 | ||||
| 520-05 | 4 | Handle knob | 25 | ||||
| 520-07 | Spring | Kuva 506-6 korvaa | |||||
| 521 | Canopy lock | 19 | |||||
| 522 | Head rest | 19 | |||||
| 523 | 4 | Assembly tool | 19 | ||||
| 524 | 4 | Ventilation flap | 19 | ||||
| 525 | 3 | Bearing mount | 19 | 80 | |||
| 526 | 4 | Intermediate tube | |||||
| 527 | 4 | Elevator components | 3 | ||||
| 528 | 4 | Rudder stop | |||||
| 529 | 4 | Rudder control lever | 25 | 69 | |||
| 530 | 3 | Pushrod guide | 4 | ||||
| 531 | 2 | B | Aileron differential laver | 3 | 4 | 80 | |
| 531-1 | 3 | B | Differential lever body | 80 | |||
| 531-12 | 2 | B | Control crank installation | 80 | |||
| 531-12-1 | 2 | B | Control crank | 80 | |||
| 531-2 | 3 | B | Gear ring | 80 | |||
| 531-4 | 3 | B | Rod | ||||
| 531-5 | 3 | B | Arm | 80 | |||
| 532 | 3 | Wing flap control lever | 3 | ||||
| 533 | 1 | Aileron hinge installation | |||||
| 534 | 3 | Mating bolts | 19 | 80 | |||
| 535 | 3 | Coupling mount | 25 | ||||
| 536 | 3 | Main bolts | 25 | 80 | |||
| 537-01 | 4 | Pitot tube | 80 | ||||
| 537-02 | 4 | Compensator joint | 25 | ||||
| 538-01 | 4 | Coupling cable clamps | 25 | 80 | |||
| 538-02 | 4 | Coupling lever extension | 25 | 80 | |||
| 538-03 | 4 | Coupling cable clamp | 25 | ||||
| 539-01 | 4 | Rudder upper hinge | 25 | ||||
| 539-2 | 3 | Rudder lower hinge | 25 | ||||
| 540 | 4 | Tailwheel shaft | 19 | 69 | |||
| 540-01 | Bearing | ||||||
| 540-02 | Bush | ||||||
| 540-03 | 4 | Bearing | 73 | ||||
| 541 | 2 | Long pushrods | 19 | 87 | |||
| 542 | 3 | B | Pull rod | 69 | |||
| 543 | 4 | Spring trim attitude plate | 19 | ||||
| 544 | 3 | Plastic components | |||||
| 545 | 1 | Canopy locking | |||||
| 545-6-1 | 3 | Canopy metal components | 68 | ||||
| 545-6-2 | 3 | Canopy metal components | 69 | ||||
| 546 | 1 | Canopy emergency jettisoning | |||||
| 547 | 1 | Instrument tubes | 69 | ||||
| 547-01 | 4 | Compensator joint | |||||
| 547-02 | 4 | Static pressure sensor | 80 | ||||
| 548 | 4 | Assembly bush | |||||
| 549 | Doublers | 80 | |||||
| 551 | 3 | B | Aileron adjust bellckrank | ||||
| 552 | 3 | B | Intermediate rods | ||||
| 553 | 4 | Safety belt attachment bush | |||||
| 554 | 4 | Rudder cable guide | 100 | ||||
| 605 | 2 | Trailer support pieces | Amendments: starting with 68 except 74,76,77,80 | ||||
| 703 | Ballast bag | 19 | |||||
| 704 | B | Ballast installation | 19 | 69 | |||
| 704-05 | B | Ballast bag 70 litres | |||||
| 704-09 | Ballast plastic components | ||||||
| 704-10-11 | Ballast plastic components | ||||||
| Carbon fibre drawings | |||||||
| 1010 | B | Wing mount | 110 | ||||
| 1011 | B | Wing mount | 1010 & 1011 replace the drawing 402 | ||||
| 1012 | B | Construction of the flange and web | 115 | Replaces the drawing 406 |
Page was last updated